What Upcoming Regulatory Changes Mean for Your Customs Compliance  

What Upcoming Regulatory Changes Mean for Your Customs Compliance  

Businesses running customs warehousing, excise warehouses or bonded logistics operations are facing another busy cycle of regulatory change. Over the next 18 to 24 months, updates to transit systems, carbon pricing at the border, excise controls and a brand-new vaping duty regime will all influence how you manage your declarations, warehousing flows and day-to-day excise and customs compliance.

In this article, we summarise four key UK and EU-linked developments:

  • NCTS 6 and Transit Security Accompanying Documents (TSADs)
  • The UK Carbon Border Adjustment Mechanism (CBAM)
  • EMCS 4.2
  • Vaping Products Duty and the Vaping Duty Stamps Scheme

For operators of customs and excise warehouses, the challenge is not just staying aware of the rules, but building them into systems, processes and data so that HMRC compliance is maintained as the rules evolve.

 

NCTS 6: Transit Security and Messaging Changes

The New Computerised Transit System Phase 6 (NCTS 6) is being rolled out in stages across Europe, with the UK delivering in two phases (starting from 1 September 2025).

A core feature of NCTS 6 is the introduction of Transit Security Accompanying Documents (TSADs). These bring safety and security information into the transit declaration itself, aligning with Phase 3 of the EU’s Import Control System 2 (ICS2). For countries that opt in to TSADs, three new messages will support this functionality:

  • IE117 — Notification of Presentation of Goods at the Office of Transit
  • IE058 — Rejection of IE117
  • IE119 — Rejection of Goods Crossing the Frontier

However, the UK has currently chosen to opt out of TSADs. That means:

  • IE117 and IE058 will not be used for movements into or out of Great Britain and Northern Ireland (GB/XI).
  • IE119 will not be used operationally in the UK, as GB/XI already rely on the Goods Vehicle Movement Service (GVMS) for frontier control. The UK’s NCTS instance will still be able to receive IE119 messages from other national administrations but will not generate them.

Alongside TSAD-related functionality, NCTS 6 also introduces minor data and message structure changes aimed at improving the overall transit system and its interoperability with other EU systems.

 

What This Means for the Transit Regime in the UK

Even with the UK opting out of TSADs, NCTS 6 still matters for traders using transit to move goods into or out of UK territory, especially where movements interact with customs warehouses, temporary storage or inland border facilities.

  • System readiness. Your transit software and message mappings will need to be validated against the new NCTS 6 specifications, even if you are not sending TSAD messages. Seemingly ‘minor’ structural changes can still cause message rejections if your data is not correctly aligned.
  • Multi-country operations. If you move goods under transit into opt-in countries (for example, from GB into the EU via common transit), you’ll need to understand how TSADs are being handled at the non-UK legs of the journey. Your service providers may be using TSADs even when UK offices do not.
  • Warehouse interfaces. Bonded warehouses that regularly receive or dispatch goods under transit should work through how NCTS 6 messaging, GVMS and warehouse stock records interact. This is important where warehouse operators are responsible for closing or opening transit movements as part of their customs management processes.
  • Audit trail. NCTS 6 is another reminder that border authorities are increasingly data-driven. Ensuring that your transit records reconcile cleanly with warehouse arrivals, departures and duty-suspended stock positions is core to robust customs compliance.

For many businesses, the immediate changes may feel technical or software-driven. But it is precisely these back-end details that can trigger delays, guarantee calls or audit findings if they are not handled correctly.

 

UK Carbon Border Adjustment Mechanism (CBAM): Carbon Costs at the Border

The UK’s Carbon Border Adjustment Mechanism (CBAM) is moving steadily from concept to reality. Following a policy consultation that closed in March 2024, the government confirmed in October 2024 that CBAM will take effect from 1 January 2027. Draft primary legislation was published on 24 April 2025 for technical consultation.

CBAM will initially apply to imports of:

  • Aluminium
  • Cement
  • Fertilisers
  • Hydrogen
  • Iron and steel

The aim is to equalise the carbon cost between domestic UK producers (already paying under the UK Emissions Trading Scheme) and importers of carbon-intensive goods. At a high level, importers will have to:

  • Report embedded emissions in covered goods
  • Purchase CBAM certificates to match those emissions (with potential credit for carbon prices already paid in the country of origin)

The precise mechanics — including registration thresholds, calculation methods and the interaction with special procedures — are still being finalised, but the direction of travel is clear: carbon intensity becomes another factor to manage alongside tariff, origin and valuation in UK customs declarations.

 

What CBAM Means for Warehouse Operators and Importers

If you import any products in CBAM-covered sectors (or goods that contain them as key inputs), you should start planning now:

  • Map your product scope. Identify which commodity codes in your portfolio fall within CBAM-relevant sectors. Pay particular attention to goods you store in customs warehouses before release to free circulation; CBAM liability is likely to arise at the point of release, not at the moment of physical arrival.
  • Understand your supply chains. You’ll need credible data on where raw materials originate, how they are produced and their associated emissions. That means engaging early with suppliers, many of whom may also be responding to EU CBAM requirements.
  • Build emissions data into your systems. For businesses with significant volumes, CBAM information will need to sit alongside existing customs management data, including commodity codes, origin, customs procedure codes and warehouse references. Manual spreadsheets will quickly become unsustainable.
  • Prepare for dual regimes. If you ship goods both into the EU (under EU CBAM) and into the UK (under the planned UK CBAM), you may find overlapping but not identical rules, exemptions and reporting timetables. Aligning your approach across both jurisdictions is important for efficient UK and EU customs handling.

For customs and bonded warehouses, CBAM adds another layer to the considerations surrounding the release of goods into free circulation. Duty, import VAT and (for some sectors) excise already play a role; CBAM will join that list for certain commodities. Getting the data right up front is essential to avoid rework and retrospective charges once CBAM goes live.

 

EMCS 4.2: Small Upgrade, Big Opportunity to Check Excise Controls

The Excise Movement and Control System (EMCS) governs the movement of excise goods (such as alcohol, tobacco and energy products) under duty suspension across the EU and certain associated territories. On 12 February 2026, EMCS is scheduled to be upgraded to Phase 4.2, a ‘corrective’ release addressing minor issues and improving interoperability with other systems.

The expectation from EU documentation is that EMCS 4.2 will have a limited direct impact on traders, focusing largely on technical refinements to message structures and specifications. However, any EMCS release is important for warehouse keepers, especially those who:

  • Dispatch excise goods in duty suspension from UK excise warehouses.
  • Receive excise goods from other EU Member States into customs/excise warehouses.
  • Operate integrated systems where EMCS movements drive stock updates and audit trails.

 

What EMCS 4.2 Means In Practice

For warehouse and excise operators, EMCS 4.2 should be treated as an opportunity to strengthen controls:

  • System testing and validation. Check that your software provider has validated all EMCS message formats, particularly e-ADs (electronic administrative documents) and movement reports, against the 4.2 specs. Even minor field changes can cause movement rejections, which then ripple through to stock accuracy.
  • Data quality review. Use the release as a trigger to review core reference data (authorisation numbers, SEED registrations, warehouse IDs) so that EMCS and your warehouse management system are aligned. High-quality data supports efficient HMRC compliance when movements are audited.
  • Process mapping. Confirm that your operational procedures (for example, when warehouse staff mark movements as ‘received’ or raise an irregularity) still match the way EMCS messages are being generated and processed.

Because EMCS sits alongside UK customs processes — especially where goods enter or leave warehouses under excise duty suspension — poor integration can quickly undermine compliance even if your core declarations are technically correct.

 

Vaping Products Duty and Vaping Duty Stamps: a New Excise Regime from 2026

From 1 October 2026, the UK will introduce Vaping Products Duty (VPD) and the associated Vaping Duty Stamps (VDS) Scheme.

Key features include:

  • A flat-rate excise duty of £2.20 per 10 ml of vaping liquid (e-liquid), whether or not it contains nicotine.
  • A legal requirement for every individual vaping product placed on the UK market to carry a secure, tamper-evident duty stamp showing that VPD has been paid and enabling traceability.
  • A digital element within the stamp design (details still to be confirmed by HMRC) to support scanning and enforcement.
  • Stamps to be purchased from HMRC-appointed specialist suppliers.

Applications for approval under VPD and the VDS Scheme open on 1 April 2026. Businesses involved in manufacturing, importing or storing duty-suspended vaping products must be approved to continue operating lawfully once the regime goes live.

There will also be a six-month grace period for older, pre-October 2026 stock already in retail channels, but from 1 April 2027, all vaping products outside of duty suspension must carry a duty stamp.

 

Key Considerations for Manufacturers, Importers and Warehouse Keepers

The vaping regime is designed to align vaping products with traditional excise-duty controls (like those for alcohol and tobacco), close loopholes, reduce illicit trade and increase regulatory oversight. That has concrete implications for your excise duty and customs management.

UK manufacturers of vaping products
  • Must obtain approval under HMRC’s VPD scheme and ensure all manufacturing and storage premises are authorised.
  • Need to apply for the VDS scheme (often as part of the same application) so they can order and apply duty stamps.
Importers and overseas manufacturers
  • Overseas manufacturers supplying the UK market must appoint a UK representative approved by HMRC to manage duty stamps, stock records and VPD returns.
  • Importers bringing goods into UK customs territory will need to ensure stamps are applied before goods are released to free circulation, either before import or in an HMRC-approved excise warehouse.
Warehouse keepers
  • Existing excise or customs warehouse keepers who intend to hold vaping products under duty suspension must seek an amendment to their warehouse approvals.
  • Where stamping takes place in the warehouse, processes must ensure that all products leaving duty suspension carry the correct duty stamp and that VPD has been correctly accounted for.
  • Records must reconcile stamped units, unstamped units in duty suspension and destroyed or lost stock to maintain strong HMRC compliance and excise control.
Retailers and wholesalers
  • Must ensure that all vaping products received or stocked from 1 October 2026 are correctly stamped (subject to the grace period for existing stock).
  • From April 2027, selling unstamped products (outside duty suspension) will be an offence, with the risk of penalties, seizure of stock and, in serious cases, criminal prosecution.

For businesses with customs or excise warehouses, vaping products will become another excise stream to manage alongside existing duties. That means updating warehouse inventory systems, integrating stamp references into product master data and ensuring staff are trained on what can and cannot be moved in duty suspension.

 

How Langdon Can Help

Taken individually, NCTS 6, UK CBAM, EMCS 4.2 and Vaping Products Duty might look like separate projects. In reality, they are part of the same trend: more data, more digital controls and more expectations that traders can demonstrate end-to-end excise and customs compliance.

For businesses operating customs or excise warehouses, these changes cut across strategy, systems and people:

  • Transit systems need to be aligned with GVMS and warehouse records.
  • CBAM data has to sit alongside your declaration data and warehouse movements.
  • EMCS upgrades must not break the link between excise movements and stock control.
  • Vaping Products Duty introduces a new excise stream where stamps, warehouse approvals and border declarations all intersect.

Langdon already works with traders who manage complex bonded and excise operations, helping them take a joined-up approach to excise and customs management rather than treating each regulatory change in isolation. Building on our DMS platforms and consultancy services, we can support you to:

  • Assess your exposure. Identify where NCTS 6, CBAM, EMCS 4.2 and VPD intersect with your existing process flows, warehouse approvals and product portfolios.
  • Design robust processes. Map end-to-end processes so that customs declarations, warehouse stock, excise movements and (for CBAM) emissions data fit together coherently.
  • Configure systems. Ensure your declaration software, warehouse systems and reporting tools are ready for new messages, data fields and reporting obligations in both UK customs and excise contexts.
  • Strengthen governance. Develop controls, KPIs and internal checks that keep you audit-ready as rules evolve, rather than scrambling to respond when a visit or enquiry lands.
  • Train your teams. Equip operational and finance teams with practical guidance on how these changes affect daily work — at go-live and throughout the lifecycle of each regime.

If you’d like to discuss how these regulatory changes affect your business — particularly if you operate customs warehousing, excise warehousing or other special procedures — Langdon is here to help you plan ahead, protect your authorisations and turn regulatory change into an opportunity to enhance your excise and customs compliance.

 

Get in touch with us today at info@langdoncustoms.com to see how our duty management systems and consultancy services can support your next phase of compliance and growth.